Single-Head TIJ Printer
12.7 mm high-resolution coding with zero maintenance.
Built around your product
A compact controller and one printhead deliver sharp dates, batch codes and barcodes on cartons and labels. Change the cartridge in seconds and the printhead is new again.
Each cartridge contains hundreds of microscopic nozzles. A resistor behind each nozzle heats the ink for a few microseconds, forming a vapour bubble that ejects a droplet. Nozzles are fired in columns as the product passes, building the image. Water-based inks suit porous board; solvent and UV-curable inks extend TIJ to films, foils and coated cartons.
Key features
- Cartridge-based — no pumps or filters
- Clean operation with no solvent top-ups
- Prints GS1 DataMatrix and QR codes
- Bracket kit for side or top printing
Process sequence
Load
Snap in a cartridge; the printer reads ink type and level from its chip.
Design
Create the message on the touchscreen or send it from the line software.
Trigger
A sensor starts the print as the pack passes within a few millimetres.
Nozzle columns fire in sequence at up to 600 dpi.
Cap
An optional shutter keeps solvent cartridges ready during line stops.
Machine video
A closer look at a typical thermal inkjet (tij) installation. Ask us for a live demonstration of the TJ-127 on your own product.
Specifications
| Model | TJ-127 |
|---|---|
| Print height | 12.7 mm |
| Resolution | Up to 600 × 600 dpi |
| Max line speed | 75 m/min at 300 dpi |
| Printheads | 1 |
| Ink types | Water-based and solvent cartridges |
| Throw distance | 0.5–3 mm |
| Interfaces | Ethernet, USB, I/O |
| Display | 5-inch touchscreen |
Typical configuration. Final values depend on your product and are confirmed in the quotation.
Add-ons
- Automatic capping station for solvent inks
- Bulk ink supply for long runs
- Multi-head stitching up to 50.8 mm
- UV LED pinning lamp
Suitable materials and packs
Questions
Is TIJ suitable for non-porous materials?
When is TIJ a better fit than CIJ?
How long does a cartridge last?
Get a proposal for this machine
- Application review by an engineer — material, code and line speed
- Trial marking, printing or packing on your own samples
- Quotation with layout, lead time, installation and service
Prefer to talk? Email info@motionworksrobotics.com or call +91 98100 93680.
